Baby Movement Only Monitor with Wired Sensor Pad
Do you already have an Angelcare Sound Monitor but want just that extra level of reassurance? Or maybe you have two little ones, twins or triplets sleeping in the same room. This Sensor Pad with highly sensitive movement detectors is the perfect complement to your existing Angelcare® baby monitoring system. Simply place one under the mattress of each additional baby and you have all bases – and babies – covered.
IMPORTANT: All babies must be sleeping in a separate cribs.
Audio "Tic" Feature
Turn on this feature and your Parent Unit will make a ticking sound to reassure you that the monitor is working even when your baby is sleeping silently.
Adjustable Movement Pad Sensitivity
Allows you to select your desired movement sensitivity level.
Battery Powered Only & Low Battery Indicator
Can be used in conjunction with the Angelcare sound monitor you already own or any other sound monitor.
Ideal for Multiple Babies
The added AC300 Movement Monitor is a good option if you already own an Angelcare® AC401, AC1100 or AC601 Movement and Sound Monitor, but have more than one baby to monitor in the same room.
Your Nursery Unit is pre-programmed to sense movement (and sound) the moment it is connected to a power source or batteries are put in it – regardless if the Sensor Pad is plugged into the Nursery Unit or not. Therefore, if no movement is detected, the alarm will emit one short beep after 15 seconds, followed by loud beeps in rapid succession 5 seconds later. To stop the alarm from sounding, turn off the Nursery Unit (using the Power ON/OFF in the back of the left wing), and connect the Sensor Pad (if not already connected).
USA and Canada:
You can order replacement parts by sending an email to our Customer Support at ac.cnicedc@eraclegna or by calling us at 1-877-281-8827. For product inquiries, please make sure to include the product number, your current country location, where and when you purchased the product, and a detailed description of your request.
You can order replacement parts through the retailer you purchased your product from. Please click here for the Contact in your country.
Always place the Sensor Pad under the mattress with the Angelcare logo/printed side facing up.
The sensor pad must be placed directly on a solid surface under the mattress. It is not compatible with hollow core mattresses or mattresses containing memory foam that comes in contact with the sensor pad.
Yes. Simply place a hard board between the crib base and the Sensor Pad movement detector. Please ensure that the board measures at least 13” x 13” x ¼” thick (33 x 33 cm x 6 mm).
Not a problem. The Angelcare® Sensor Pads have adjustable sensitivity to detect movement anywhere on the crib mattress. Please ensure that you have adjusted the sensitivity in the case of false alarms and place the sensor pad under the mattress positioned in the center for optimal coverage.
The Sensor Pad is completely safe. The wires do not carry any current nor emit any form of energy. Please ensure all cords are out of baby's reach.
No. The Sensor Pad is designed to work under your baby’s mattress.
Our research shows that parents tend to use the Angelcare® AC300 for an average of 24 months.
The AC300 Movement Monitor is an ADDITION to your existing Angelcare® AC401, AC1100 or AC601 Movement and Sound Monitor, when more than one baby to monitor need to be monitored in the same room. DO NOT use monitor with two or more babies if they are in the same crib, as the monitor will continue to pick up movement even if one of the babies has stopped moving. You need to install a separate system in a different crib for each baby. You must then set each system to a different channel to avoid interference. Furthermore, we DO NOT recommend using two AC201 or two AC1100 in the same house as you may experience interference. Instead, we recommend one movement and sound monitor (AC401, AC1100, AC601) plus one movement-only monitor (AC300) for twins, and two movement-only monitors in the case of triplets.
Angelcare® warrants to the original owner of this product that the Angelcare® Movement Monitor (Model AC300) is free from defects in materials and workmanship for a period of one (1) year from the date of the original purchase. If this monitoring system fails to function properly when used as directed under normal conditions, within the one year period, Angelcare® will either repair or replace the product at our option free of charge, when it is returned complete and in its original packaging, prepaid postage, and insured to Angelcare.
The product must be accompanied by a proof of purchase, either a bill of sale, receipted invoice, or other proof that the monitoring system is within the warranty period. Angelcare® will bear the cost of repairing or replacing the product and shipping it back to you.
This warranty does not apply to a product that has been damaged as a result of improper maintenance, accidents, improper voltage supply or other misuse.
The warranty is also void if the owner repairs or modifies the product in any way. Angelcare® is not liable for any incidental or consequential damages with regard to this product. The warranty also excludes any liability other than what is stated above. No other warranties are given.
LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME RESULTING FROM USE.
IMPORTANT! This Angelcare Monitor is a personal care product. Please do not return this product to the store. If you have questions, or need help, please contact customer support.